Increase the efficiency of your heating system

When water is heated in a water heater or with a tank-less water heater, shard water always leads to deposits on the heating elements. This layer inevitably causes a great reduction in the capability of the heat to transfer.

A scale deposit of only 2mm (~0.078 inches) can lead to an energy loss of more than 15%. The increase in heating time leads to a tremendous rise in your power consumption.

Your hotel operation – some cost saving factors

The analysis of the cost saving potential for your hotel includes factors such as:

Number of rooms

Number of bathrooms/toilets

Number of restaurant kitchens – and size of them

Size of pool and spa area

Daily laundry volume

Type and dimensions of the heating system

Number of cooling towers and dimensions

Garden area that needs irrigation

Daily use of water

etc.

These factors quickly multiply and add up to a considerable cost saving potential.
Please contact your local distributor for a thorough cost analysis.

 

Throw out that expensive water softeners

Running a water softener is a costly measure. Large amounts of salt are needed to operate the system. Hundreds of gallons of water are wasted each time the softener granule has to be washed. Malfunctions and repairs are likely with an built-in system. These can easily add up to hundreds of dollars in repair costs.

Daily Savings for Machinery

Vulcan improves the performance and efficiency of many machines that operate with water. The use of Vulcan saves you time and money from day one of the installation.

Machinery and appliances have six typical money saving areas

1. Scaling inside the machine is minimized.
2. If additives are used they are often more effective and last longer.
3. The machine can run longer before it needs to be serviced again. Often cleaning of the parts is much easier.
4. Less repairs and less need to replace individual parts.
5. Tanks that carry water or other liquids need less maintenance and cleaning thereof. Most of the time it is much easier and faster. This reduced service time results in fewer production breaks.
6. Less biofilm and bacterial growth allows a reduction of control measures and chemicals to combat this.

 

 

Some examples of savings potentials for machinery

Cooling towers

• Higher cycles of scale concentration which minimizes water usage
• Less clogging and therefore fewer malfunctions
• Less maintenance service needed per year
• Easier cleaning of the tank
• Less toxic bleed water with minimized bacterial growth

 

Solar water heating

• Less scale build-up in the whole system
• Less maintenance service per year
• Less repairs of individual parts
• No more need to circulate acids
• Less scale in distributor tubes, heat exchangers, vacuum tubes, etc.